Warrior One v2 For this version we wanted to see how we can do more for the fans of the Warrior knife. The blade remains true to the original.  We 3d sculpted the titanium frames, pocketed it. Added a titanium backspacer, 3d milled clip, added a lanyard hole. Wired wheel hardware. And David and his team rounded everything on the handles like the Warrior2. The price are $375 + shipping.

Please visit your Dealers

.I am honored to offer the New Endevour Design.  The Blade is 3.75 inches and hand ground. Made from S35VN, we get the steel from Speciality Metals in Texas. Handrub flat with machine satin grinds. 3D milled slot on the blade to use in thumb opening. The handles are 4.75 inches. They start from a half inch billet of Titanium. The backspacer integrated to both halves of the handle. We then milled pockets to lighten the overall weight. The clip also starts from a half inch billet if ti. Instead of inserting a ball bearing in the front, David's team milled a ball out of the titanium. The clip is blindscrewed into the frame. The low profile flipper disappear into the frame when deployed. Weight is 5.5 ounces.  The Retail for the Endevour is$445 + shipping.

Tempest Production Folder- Built by David Deng of Reate Knives. 3.75 inch S35VN blade-hand rub flats with stone wash grinds. 3D sculpted Titanium handles-finished by me here. with pockets milled in to lighten the knife. Titanium backspacer with 3D sculpted clip. All hardware will be Titanium. First 100 available are a light stonewash handles with BLUE ano hardware.  The price is $400 + shipping. 

Please visit your Dealers

The Remedy Productions are built by David Deng of Reate Knives. It has a 3.75 inch blade made of S35VN steel. The 3D handle are Titanium with a Titanium milled pocket clip. The framelock has a harden lock insert. The flipper allows the blade to be deployed with authority. 

SDC-Slim Daily Carry version 2.  New design that I have been working on for a number of years. David of Reate knives have done an outstanding job on these. 3.75 inch  blade and 1 1/8 at the widest point. S35VN steel-stonewash and hand rub satin. Titanium handles with lightening pocket in the frame. Ti backspacer with milled clip. Blue titanium hardware
Price $350 + shipping

Warrior 2 Marble Carbon Fiber Edition  This is the same as the Titanium Warrior2 with the addition of Marble Carbon Fiber. The blades are 3.75 in hand ground blade. The blade steel is S35VN.  The Titanium  and Carbon Fiber handles are 3D machine then hand sanded to remove the mill marks. We lighten the handles with pockets on the inside. The Warrior 2 weight 4 ounces. All hardware are Titanium. And we redesigned the clip. I hope you are as happy with your Warriors as I am. Retail is $400+shipping

Special Edition-Carbon Fiber Tempest. 3.75 in blade made from S35vn steel. Two tone blade-satin flats, stone wash bevels. Titanium framelock with harden lock insert. Beautifully contoured 3D machined Carbon Fiber scale. Takes the weight from 5.5 ounces to 4.8 ounces.  As some of you may know, I love carbon fiber but it destroys milling bits. This makes it cost more to work with than other materials. Redesigned 3d machined pocket clip. All hardware are titanium and screws are ano blue. There are only 49 pieces. That is all. First come first served.Price-$435+shipping

J.Bin Custom #5

J.Bin Custom #6

For the Warrior 2 David and I went back to the drawing board. I wanted to see if we can finally bridge the gap between production and custom. This was hard. We started with a 3.75 in hand ground blade. The blade steel is S35VN.  The Titanium handles are 3D machine then hand sanded to remove the mill marks. We lighten the handles with pockets on the inside. The Warrior 2 weight 4.7 ounces. All hardware are Titanium with stippled pivot caps. And we redesigned the clip. I hope you are as happy with your Warriors as I am. Retail is $400+shipping 


Carbon Fiber Warrior One-David and his team have been working round the clock to get these to me. I love carbon fiber and wanted it on the Warrior one design. The specs are the same. 3.4 inch blade made of S35VN steel. Titanium framelock with lightening pockets. Aircraft grade Carbon Fiber. Sculpted clip and all hardware are Titanium and wired wheel. Weight 3.6 ounces.

Price $380.00  Thank you

1/4 inch thick titanium Xeno. This is a larger size at 5 inch in length. Features a pry bar/screwdriver, bottler opener, 1/4 inch hex bit holder along with hex wrenches, belt and finger loop. Price is $120.00

Current designs

Remedy-Sibert Edition

This is a hand ground bladed Remedy folder by Shane Sibert. 3.75 in blade-S35VN steel. Alan folts and I fitted the stop pin and lock to each knife. There is a tree bark texture to the handles. I finished in a flat -shiny gray finish.  All hardware are titanium and are individually wired wheel finished. pivot caps and standoffs are ano.  Price is $800 + shipping. Thank you

​​​J.Bin/LMD custom Warrior 2 

​I first learn about J.Bin from another collector-Hank Greenberg. We both collected Lum's. Hank said if Bob had a son into knife making it would be J.Bin.  I contacted J. over two years ago. Its been a long road to this project but the results are worth waiting for.  J. received parts that were flat and did the Blade grinds, hand rub finish . Contouring on the handles, fitting the locks, finishes on the handles. The action on these are smooth. The blades are handrub S35vn Steel-3.75 inches in length. Handles are titanium-4.75 inches in length. Harden steel lock insert. Sculpted clip. The finishes are beautiful. As with any custom there are slight differences to each one. There are only 20 pieces done. Only 15 for sale. The custom Warrior 2 are $800 + shipping